Back to Phone-Master Support page / PANASONIC    or    to home-page Phone-Master



How do I set up and use Live Call Screening?  

LIVE CALL SCREENING allows you to listen to callers as they leave messages in your mailbox.  If a caller is leaving a message and you want to talk to him/her, pick up handset of press SP-Phone key

LIVE CALL SCREENING

KX-TD Systems

KX-TA Systems

SETTING LIVE CALL SCREENING

With telephone idle and handset on-hook

Press the LCS key

Enter your  password  (see below)

SETTING LIVE CALL SCREENING

With telephone idle and handset on-hook

Press the LCS key

Enter your  password  (see below)

CANCELING LIVE CALL SCREENING

With telephone idle and handset on-hook

Press the LCS key or the LCS Cancel Key if you have an older software version

CANCELING LIVE CALL SCREENING

With telephone idle and handset on-hook

Press the LCS Cancel key

Programming an LCS Key

In order to use this feature it is necessary to assign a LCS key on your digital Panasonic phone.  To assign this key press the following:

KX-TD Systems KX-TA Systems

PROGRAM 99 (If you do not have a program button, press PAUSE).  Press the key you want to use.  Dial 92 for a LCS key.  Press STORE.  Press PROGRAM or lift handset and hang up.

Move switch on the end of your phone to PROGRAM or press PROGRAM.  Press the key you want to use.  Dial 92 for a LCS key.  Press STORE.  Move switch on the end of your phone to PROGRAM or press PROGRAM

Programming an LCS Cancel Key

In order to cancel Live Call Screening it is necessary to assign a LCS Cancel key on your phone.  This key not necessary on newer version KX-TD systems.  To assign this key press the following:

KX-TD Systems KX-TA Systems

PROGRAM 99 (If you do not have a program button, press PAUSE).  Press the key you want to use.  Dial 93 for a LCS Cancel key.  Press STORE.  Press PROGRAM or lift handset and hang up.

Move switch on the end of your phone to PROGRAM or press PROGRAM.  Press the key you want to use.  Dial 93 for a LCS Cancel key.  Press STORE.  Move switch on the end of your phone to PROGRAM or press PROGRAM

 

 

SETTING YOUR LCS PASSWORD

The next step is to set a password.  A password is set so unauthorized personnel cannot turn on your LCS while you are out of the office.  The procedure is different for the digital and analog systems.  

Older versions of the KX-TA 624 do not provide this feature and the system must be programmed in APITS.  Digital systems must be programmed in DPITS

KX-TD Systems

To set your password:

KX-TA Systems

To set your password:

Intercom 799

Enter the password (000-999)

Enter the same password again

Lift handset and hang up

Press: Intercom 77 STAR

Enter the password (000-999)

Enter the same password again

Press POUND

Lift handset and hang up

To cancel your password:

To cancel your password:

Intercom 799

Enter the password (000-999)

Lift handset and hang up

Press: Intercom 77 STAR

Enter the password (000-999)

Press: POUND

Lift handset and hang up

Back to Phone-Master Support page / PANASONIC    or    to home-page Phone-Master