Time Set KX-TD 208, 816, 1232, 500
How do I adjust the time on my digital Panasonic system?
When your system is connected to an ISDN-line, the timesetting usually will be synchronized with the clocks of the ISDN-network the moment you make an outgoing (answered) call. For these systems no manually update is required.
For all other systems: You must be on the main phone on jack 01 to set time. You can determine if your phone is jack 01 by pressing PROGRAM 99 on a display phone and then pushing the number 6 on the dial pad. The phone will read the jack and extension number. When you have determined the jack 01 phone, do the following.
|
Example is to change time from 3:15 PM to 4:17 PM |
|
|
KEYSTROKES (Press these keys) |
DISPLAY READS (LOOK FOR THIS READOUT ON YOUR DISPLAY) |
|
Press PROGRAM * * 1234 (Default password is 1234. yours may have been changed) |
USR-PGM NO à |
|
Press SP-PHONE 3 Times |
3:15 PM 12 (Hour is flashing) |
|
Enter 2 digit hour |
04:15 PM 12 (Hour is Flashing |
|
FWD/DND button or press the softkey below -> on the display |
04:15 PM 12 (Minute starts flashing) |
|
Enter 2-digit minute |
04:17 PM 12 (Minute is flashing) |
|
Auto Dial/Store Button |
New time is stored |
|
Lift handset and hang up to leave programming mode |
|